 |
| |
Windows 95/98 incorporate
many new useful features for its users.
In particular, Dial-Up Networking enables
users to connect to the Internet using
a PPP connection. In this document,
we will try to give you a step by step
guide to install all components needed
to connect to the Internet.
What You Need
?
1. a properly connected modem with driver
installed
2. a Win95/98 cd-rom or distribution
diskette
3. this setup guide
Installing Dial-up Networking
This step is not necesary if you
have already installed the dial-up
networking; you will find an dial-up
networking icon in 'My Computer' folder
if dial-up networking has been previously
installed.
1. Click 'My Computer', 'Control
Panel' and 'Add/Remove Programs''.
2. Click on the 'Window Setup' tag,
double-click on 'Communications' and
tick 'Dial-Up' Networking'.
3. Click OK (you may be asked for
the Win95/98 cd-rom or distettes).
|
|
|
Specifying
Identification
This step is not necesary if you
have entered identification for your
window before.
1. Click 'My Computer', 'Control
Panel' and 'Network'.
2. Click on the 'Identification' tag,
enter "My Computer" as the
Computer Name and "My Workgroup"
as the Workgroup.
|
|
|
Adding
Dial-up Adapter
This step is not necesary if you
find 'Dial-up Adapter' already present
in the (Network) 'Configuration'.
1. Add the 'Dial-up Adapter' by clicking
'Add', 'Adapter', 'Add'.
2. Select 'Microsoft' in 'Manufacturers'
(on the left).
3. Double click on 'Dial-up Adapter'.
Adding TCP/IP
If there is no 'TCP/IP' in the (Network)
'Configuration' originally, add the
'TCP/IP' Protocol by follow these
steps.
1. Clicking 'Add', 'Protocol', 'Add'.
2. Select 'Microsoft' in 'Manufacturers'
(on the left).
3. Select 'TCP/IP' in 'Network Protocols',
and click OK.
Remove 'NETBEUI' and 'IPX/SPX' if
any, by highlighting it and click
'Remove' one by one, Click OK after
the removal.
Please bear in mind always restart
your computer as if computer prompt
you!!!
|
|
|
| |
| |
| Installing
and Configuring Dial-up Network Connection
1. Click on 'My Computer', 'Dial-up
Networking', 'Add new connection'.
2. Type in 'NETfront Internet' for
the computer you are dialing, click
'Next'.
3. Type in the 'Telephone number'
Box:
30013579 (V.90 or Any Modems) or 30041500(K56
FLEX Only)
and select 'Hong Kong' in the 'Country
Code' box.
4. Click 'Next' and 'Finish'.
|
|
|
5. You should have an icon called 'NETfront
Internet' now, use your right mouse
button to click on it and select 'Properties'.
6. Click on the 'Server Types' Button
, click on the 'TCP/IP Setting', and
check the 'Use Specific DNS Server'.
7. Enter '202.81.252.1' in the primary
DNS and '202.81.252.2' in the secondary
DNS, click OK.
Making a
Connection to Us
This is the general step for you
to connect to us. You don't have to
redo the above configuration procedure
every time you connect to us.
1. Double-click on the 'NETfront
Internet' icon, type in your username,
your password, and click 'Dial'.
|
|
|
2. After successful connection , you
will see |
|
|
3. You are now connecting to the Internet,
minimize the window and start any internet
application you like (Netscape, Eudora,
...).
|
|
|
|
|
|
|
|
|
|
|
